Tech Forum: Tech Forum
Ask your tech questions here. We have a lot of experience in the club. Someone can probably help you... Opinions and advice given here are solely the responsibility of the posters. The PCA and/or UCR are not responsible for the opinions and advice expressed...BECAUSE OF CACHING, IT MAY TAKE UP TO 15 MINUTES BEFORE POSTS APPEAR ON THE FRONT PAGE.

Back to Forum List >> Back to Topic List >> VIEW ALL POSTS

Otto Mittelstaedt
Posted:06-Apr-2010
Modified:07-Apr-2010
Anyone have an 84 Carrera or Earlier Turbo with 28 row brass cooler?
Help! I bought a brass turbo/84 carrera 28 row cooler ( not the one with the fan) to replace the hoop cooler, and I can't figure out how to secure it. At the top it attaches to the headlight bucket. At the bottom?

The Porsche parts pdf's don't show a bracket.

I found a thread http://forums.pelicanparts.com/porsche-911-technical-forum/275047-mounting-28-tube-oil-cooler.html that shows various conversions. It would be really nice if someone could post a pic of an 84 Carrera or earlier turbo that had this cooler showing the bottom bracket. If someone had the part number, that would be great too !
28rowcooler.jpg
Subscribe
Respond
Dragan Simovic
Posted:07-Apr-2010
'Bonded Rubber Buffer'
I see that according to the Porsche PET parts program, the European SC's came with the cooler you describe, and they use 3 rubber isolation mounts ('bonded rubber buffer', Porsche p/n 930 110 194 00) to secure it. It shows the upper mount, but not the other mounts. The same 3 mounts are used on the Carrera's with the electric fan cooler, and in that parts diagram it show a lower mount that secures to the bottom of the cooler, but not what the other end of the mount attaches to.
1983 9110001.pdf
1983 9110001.pdf
1984 9110001.pdf
1984 9110001.pdf
Subscribe
Respond
Otto Mittelstaedt
Posted:08-Apr-2010
Thanks !
Thanks for the responses !
Subscribe
Respond
Phil Downe
Posted:09-Apr-2010
The Tech Questions of late...
And that gentlemen is what a car club is all about... Kudos to all for helping out a fellow club member.

Cheers,
Subscribe
Respond
Clarence Dam
Posted:09-Apr-2010
bracket
Hi Otto found a good picture of the bracket on this forum: http://www.early911sregistry.org/forum/showthread.php?t=32641 Third photo down in first post.

Clarence
Subscribe
Respond
Clarence Dam
Posted:07-Apr-2010
bracket
Hi Otto I do indeed have that same cooler.
there is an L-shaped bracket of sort that extends from the inner fender area.
I took some pics, I hope they help.
HPIM9324.JPG
HPIM9326.JPG
HPIM9327.JPG
Subscribe
Respond
Display Num
Power by Simplest Forum - Copyright Ambitionality Software LLC 2008. All rights reserved.