Ask your tech questions here. We have a lot of experience in the club. Someone can probably help you... Opinions and advice given here are solely the responsibility of the posters. The PCA and/or UCR are not responsible for the opinions and advice expressed...BECAUSE OF CACHING, IT MAY TAKE UP TO 15 MINUTES BEFORE POSTS APPEAR ON THE FRONT PAGE.

Back to Forum List >> Back to Topic List >> VIEW ALL POSTS

Wayne Spiegelberg
Posted:23-Aug-2010
Modified:23-Aug-2010
944 start problem
Hi Kevin, chances are you may need a new DME Relay. I always carry a spare KAE # 3.308.120 in the glovebox of my `89 951 Turbo S.
Let me know if this helped...Wayne
Subscribe
Respond
Kevin Kurnik
Posted:03-Sep-2010
944 Start problem
Thanx Wayne - there was a spare in the tool box I got with the car. Where is a good place to buy these in Toronto area
Subscribe
Respond
Wayne Spiegelberg
Posted:26-Sep-2010
944 Start Problem
Mantis Racing in Oakville has them or any of the UCR Tech approved centers shown in Provinz should be able to get you one.
Subscribe
Respond
Display Num
Power by Simplest Forum - Copyright Ambitionality Software LLC 2008. All rights reserved.